比利牌恩泰克仿古防水油

  ANTIK用于需要防水的大理石、花崗巖等石材表面，令石面顯出一種古董色彩。它能防潮、防油膩及污漬，并使石面光滑如緞。ANTIK尤其適用于噴沙、酸處理、石錐、火燒后的石面，亦可用于刷成面、磨刀面及拋光面，使表面色澤更佳。

  使用方法：使用前必須令表面完全干燥。對火燒面、沙噴面或粗鋸石面可涂兩層。第一層涂后約一小時再涂第二層。對磨刀面、拋家面則只需涂一層、不宜過多，也可以由用戶決定涂一層或兩層。如想避免石面的緞質色澤，只需在首次使用本品后24小時內用浸潤ANTIK的抹布研磨石面，即可去除多余涂料以減少光亮度。用抹布或紙擦干材料。

  ROTECTIVE，ENHANCER AND ANTIQUELOOK “QNTIK”

  ANTIK is used on marble, granite and stone as water repellent and it gives “antique look” to the material Besides giving a remarkable “wet look” to the stone, it protects it against humidity, grease and oil stains ANTIK gives a nice satin look to the stone.Vert good on land-blasted, acid treated, bush-hammered or flamed finished stone and it can also be used on bushed, honed and polished surfaces to enhance the stone colour.

  INSTRUCTION FOR USE:

  The surface to be treated must be completely dry. apply the product twice on flamed, bush-hammered, land blasted or rough sawn material; one coat first and the second coating after one hour. On honed and polished material, apply once making sure not to put too much. the end-user will decide whether to apply one or two coatings. avoid the satin glossy look just by rubbing the surface with a cloth soaked with ANTID within 24hours form the original application, this way the excess will be removed this the surface w